View Full Version : Danfoss thermostatic expansion valve TFL-3, R-12

04-07-2016, 06:26 PM
Need to make a new condensing unit for an old CO2 storage tank.

The current TXV is TFL-3, R12.

Does anyone have the capacity\pressure drop table for it?

Thank's guys.

Glenn Moore
04-07-2016, 10:11 PM
Hi chemi
Have you a picture of this valve as I don't recognise your description details for it . I have Danfoss catalogues going back many years so any further info will help

05-07-2016, 04:47 AM
will get a picture today, thank you

05-07-2016, 11:36 AM

It just might be another manufacturer.

05-07-2016, 11:38 AM

The other side

Glenn Moore
05-07-2016, 01:32 PM
Hi Chemi
It's not a Danfoss it looks like an old Flica valve . I'll see if I can find my old Flica catalogue Kr Glenn

05-07-2016, 02:38 PM
Hi Chemi,
Fairly certain it is a Flica valve. Unfortunately, my records do not go back far enough.

05-07-2016, 05:49 PM
I was looking on the web for Flica old TXV's but no luck.
I guess the 3 is 0.3 TR
there was no sticker on the compressor but it was Copeland 1.5 hp for low temp.