PDA

View Full Version : Wireless gauges







Shussey1
25-05-2016, 07:19 PM
I have a yellow jacket mantooth and I this will be a stupid question but high temp pipe clamp, where dose it go on the discharge of the compressor or the liquid line.

The Viking
25-05-2016, 07:35 PM
It all depends on what you want to measure.

- If its on the discharge you will get the discharge superheat.
- If it is on the liquid line you will get the sub cooling.

I believe the default for the YJ app is sub cooling, so if that is what you want to see then liquid line it is.

:cool:

Shussey1
25-05-2016, 07:47 PM
Ok thanks, I was looking at the testo smart probes as they are all wireless

The Viking
25-05-2016, 09:12 PM
I have a yellow jacket mantooth.


Ok thanks, I was looking at the testo smart probes

???
However, same principle applies...

:cool:

Shussey1
25-05-2016, 09:22 PM
I find the interconnecting cable between the two pressure sensor too short and some times hard to fit