PDA

View Full Version : Expansion valve



Peter_1
06-05-2006, 08:10 AM
Does someone know which brand this valve is?
I thought a Flica or an Egelhof.
On the valve is stamped AO - TA6 - and R12
Picture is mobile phone quality:(

Peter_1
06-05-2006, 08:14 AM
Additional questions.
1: does someone know the capacity of this valve at -10°C(14°F) and 35°C (95°F) condensing on R12?

2: Does someone know of a valve straight in/straight out (1/2 in and 5/8 out)

Peter_1
06-05-2006, 08:20 AM
Capacity must be something around 13 kW (44357 BTU/hr/3.696 TR) because it's connected to a Bitzer 4TC-8.2Y

old gas bottle
07-05-2006, 05:06 PM
sporlan do one, will have to cut the flares off and braze it in,choice of power heads,cant realy help with numbers,sorry,just watch the super heat is not wide open and floods the compressor on start up,as you can tell it caught me out.