PDA

View Full Version : micro flame oxy acetylene







Andy Kirk
09-05-2016, 10:20 AM
Hi all, i have a microflame oxy acetylene kit that i brought to n.z from the uk. Unfortunately after 12 years it needs new hoses. Anyone know if microflame are still around? Tried online but cant seem to find any info! Does say Diss, Norfolk on the oxy cylinder. Got it originally from Hrp, but cant seem to get any info from there website either.
Thanks:confused:

monkey spanners
09-05-2016, 11:00 AM
Think these people do them, if its what i'm thinking of, small set with bottles carried in white plastic coated wire mesh tote.

http://www.srw.co.uk/

chemi-cool
09-05-2016, 04:02 PM
Welcome to the forum Andy,
Before you spread your wisdom, take a few moments to read the rules.:)

Here is what you're looking for,

http://www.ebay.com/itm/Jewelers-Jewelery-Micro-Mini-Little-Soldering-Cutting-Welding-Brazing-Torch/282028464606?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3D7c5fa3b39c7846cbb8b d85e5a79dd497%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D262085205469

Glenn Moore
14-05-2016, 10:32 PM
Andy
I still get the Microflame gas cannisters from HRP so I assume they still do the complete kit still. Ps they have been taken over by the Beijer group ie Dean & Wood so not sure if its still the same.