Stuart Hoskins
15-04-2016, 08:54 PM
Hi everyone pretty new to this site but wanted to know if anyone has installed a PURY-P350YJM-A
vrf.
I have used a central controller AT50 and also have a water hater component box which is also on this controller and its own. all units have been grouped and addressed and logged into to controller but when i go to operate one unit it seems to run for literally a few seconds then switches itself off. this is happening on every unit.
I have power to all indoors and also have 29v across my m-net connections. My only thought i have is that maybe its a protection till i have added the required refrigerant charge. can anyone share a little light or have any info
vrf.
I have used a central controller AT50 and also have a water hater component box which is also on this controller and its own. all units have been grouped and addressed and logged into to controller but when i go to operate one unit it seems to run for literally a few seconds then switches itself off. this is happening on every unit.
I have power to all indoors and also have 29v across my m-net connections. My only thought i have is that maybe its a protection till i have added the required refrigerant charge. can anyone share a little light or have any info