Martin Davies
15-03-2016, 07:04 AM
Good morning all,
I am installing a new temp monitoring system across the site in all cold-stores to replace the existing, out of date Testo system.
The current devices are currently mounted on the wall approximately 3/4 of the way up. This can mean they are effected by air off temps from near by evaps and so not give an accurate store temp. This can create false alarms and false reports if looking back over the day/week/month.
My question is, what is the best height/location for the new devices to be mounted at? All the stores are different heights and sizes but range from 25' to 50'. Some are so high that come callibration day they are near on impossible to get to because of pallets of fruit, access etc..
I am installing a new temp monitoring system across the site in all cold-stores to replace the existing, out of date Testo system.
The current devices are currently mounted on the wall approximately 3/4 of the way up. This can mean they are effected by air off temps from near by evaps and so not give an accurate store temp. This can create false alarms and false reports if looking back over the day/week/month.
My question is, what is the best height/location for the new devices to be mounted at? All the stores are different heights and sizes but range from 25' to 50'. Some are so high that come callibration day they are near on impossible to get to because of pallets of fruit, access etc..