PDA

View Full Version : R1134a refrigerant pump







chemi-cool
11-03-2016, 09:35 AM
I got a nice contract to fill once a month 10 bottles of 60kg each from a ton container.

Looking for a dedicated pump for the job.

Anyone who knows something, heard something or seen something that can help, your input is valuable [my bank manager is with me on this one...:cool:]

monkey spanners
11-03-2016, 05:32 PM
Something like this?

http://www.polarpumps.co.uk/e22l-liquid-pump/

chemi-cool
11-03-2016, 06:35 PM
Thanks,
Sent them a request.

al
12-03-2016, 11:28 AM
If it is liquid would an appion or similar recovery unit work, would the virgin gas kill it i wonder?

chemi-cool
12-03-2016, 11:39 AM
If it is liquid would an appion or similar recovery unit work, would the virgin gas kill it i wonder?

I start tomorrow with my recovery unit. I don't see any problems apart from the fact that it will take more time than a pump [they pay per hour....:D]

Rob White
12-03-2016, 03:18 PM
.

Can you push - pull with your recovery?

Are you putting 10 x 60kg into the ton pig or are you
taking the 10 x 60kg from the pig/

Regards

Rob

.

Rob White
12-03-2016, 03:21 PM
.

Just re-read your original post, "from the 1 ton pig" :D

Could you not build a 10 way manifold from pipe and then
vac out the cylinders, plus freeze the cylinders and use the
pressure difference to move the refrigerant?

Regards

Rob

.

chemi-cool
12-03-2016, 05:13 PM
.

Just re-read your original post, "from the 1 ton pig" :D

Could you not build a 10 way manifold from pipe and then
vac out the cylinders, plus freeze the cylinders and use the
pressure difference to move the refrigerant?

Regards

Rob

.

Busy day at the pub Rob?:cool:

The bottles are being filled on electronic scale, ambient is 30, North pole is 12000 km away, where am I going to freeze them?