View Full Version : Motor protection
beida
10-03-2016, 07:02 PM
Hi brother
I want to know where I can buy Texas Instruments 2ACE-2C1. Or replacement of it
I looked it up well
And contacted my supplier .. But nothing's
Brian_UK
10-03-2016, 10:05 PM
Found this, they're not cheap.
http://www.carbonbrush.com/klixon2ACE.htm
beida
10-03-2016, 11:19 PM
Found this, they're not cheap.
http://www.carbonbrush.com/klixon2ACE.htm
Thank mr Brian
Hhhh 500$ :rolleyes:
Emmmm but it is necessary to protect my dx screw
I sent email and now waiting :)
RANGER1
11-03-2016, 12:18 AM
Not sure what it is but could it be a thermistor relay or something like this
https://www.bitzer.de/shared_media/documentation/st-120-1.pdf
Grizzly
11-03-2016, 05:49 AM
Hi brother
I want to know where I can buy Texas Instruments 2ACE-2C1. Or replacement of it
I looked it up well
And contacted my supplier .. But nothing's
Either speak to your local JCI people or contact Prestons via this Link.
http://www.prestoncompressors.com/
They supply motor protection units and the relevant thermistors for York DXS screws.
The ones you fit are very model specific. So its worth talking at least.
Alternatively try talking to Ghaz ( on this forum!) he is very clued up on many types of rebuilds rebuilds and may be able to help?
Grizzly
beida
11-03-2016, 02:09 PM
Either speak to your local JCI people or contact Prestons via this Link.
http://www.prestoncompressors.com/
They supply motor protection units and the relevant thermistors for York DXS screws.
The ones you fit are very model specific. So its worth talking at least.
Alternatively try talking to Ghaz ( on this forum!) he is very clued up on many types of rebuilds rebuilds and may be able to help?
Grizzly
Thanks brother
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.