View Full Version : Question for the Old Timers. (Ref Early Cold Stores?)
Grizzly
02-03-2016, 04:07 PM
A good Friend and learned member of our Industry has just asked a question.
To which I felt some of our older guys may be able to help?
Early Cold Store Insulation was a form of Cork Layers clad in a Asbestos Board.
Which Had a Grey and Black stippled Finish.
What was that Board / Finish called?
It used to be a really common Finish.
Thanks Guys!
Grizzly.
B G Scott
02-03-2016, 04:35 PM
I think it was called glazed asbestos, could be wrong, memory is not what it was.
Maybe working too close to old cold store walls!!!!
Grizzly
02-03-2016, 04:42 PM
Thanks BG.
I think there is a trade name for it?
Hopefully some others haven't stood as close to the walls as you and I?
Grizzly
chemi-cool
02-03-2016, 05:53 PM
Here Grizzly,
Widen your cork horizon...
http://www.kurk.be/media/files/Cork-insulationbookauthor-Pearl-Edwin-Thomas-1928.pdf
monkey spanners
02-03-2016, 06:17 PM
Found this,
http://www.aic.org.uk/asbestos-trade-names/
I have seen them still being used reasonably recently!
Grizzly
02-03-2016, 06:53 PM
Brilliant Link MS thanks sent the link to my esteemed colleague.
Chemi your link may take a while to read, there is a lot there.
Thanks.
Grizzly
Magoo
02-03-2016, 09:18 PM
HI grizzly.
Here it was called fibrolite.
Grizzly
02-03-2016, 10:23 PM
HI grizzly.
Here it was called fibrolite.
Your Memory is scary sometimes Magoo! :D
Thank you
Grizzly
rnine
10-03-2016, 07:50 AM
I seem to remember it being known as stippleglaze. That might have been a trade name though.
Grizzly
10-03-2016, 04:34 PM
I seem to remember it being known as stippleglaze. That might have been a trade name though.
Thank you Friend!
I suspect this question has moved on now!
But thanks all the same.
Steve.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.