PDA

View Full Version : HC comp change







Rob White
25-01-2016, 12:20 PM
.

Might be of use


https://youtu.be/Fr5Vl2q3fiw?list=PLWaf4HOzsuMuBVnPu7pEJyPlt0Hcenq0U

Rob

.

chemi-cool
25-01-2016, 04:19 PM
Cheap advert with elevator music.

The first thing to do after emptying the pot is to break all the service tubes, compressor and drier.

Looks like an invitation for leaks.
Nothing beats good brazing.

chemi-cool
25-01-2016, 04:19 PM
Cheap advert with elevator music.

The first thing to do after emptying the pot is to break all the service tubes, compressor and drier.

Looks like an invitation for leaks.
Nothing beats good brazing.

monkey spanners
25-01-2016, 09:26 PM
I don't trust those lokring things, probably just braze the new one in. Vac the system first and fill with nitrogen, then cut pipes and braze in new components.

install monkey
25-01-2016, 09:47 PM
not lost any eyebrows yet doin pot changes the old fashioned way
:p

mikeref
26-01-2016, 08:34 AM
Removing the Relay... Good luck with not receiving a sting from the start Capacitor. I don't care if the Cap had a bleed resistor or not. Capillary tube wasn't cut properly. Ongoing cooling issues.
Ta for posting Rob :)

Elevator music Chemi? Here's one we hear. https://www.youtube.com/watch?v=GyEksqCKx2o

chemi-cool
26-01-2016, 03:19 PM
Yes Mike, Richard Clayderman is the king of elevators music.