Climaventa W3000 alarm reset

[licencetochill]

Hey guys, just wondering if anyone can tell me how to reset the compressor maintenance alarm S151 on a Climaventa W3000 controller running a water chiller.
if someone has the passwords as well I'd appreciate it

[Grizzly]

Hi My friend.
I quote
"10 ALARMS
Press the ALARM key once to enter the “alarms menu” and view the alarm message along with its code.
If there is more than one alarm, scroll the menu using the “Up” and “Down” keys.
To reset the alarm, press the ALARM key again and HOLD IT DOWN until “No alarm active” is displayed.
If the message does not appear it means that one or more alarm conditions are still active.
Press any other key to exit from this menu.
See ANNEX A for the list of alarm codes.

I fear I may of been a little hasty as yours is a service Alarm.
I will try and dig deeper for you.
I know there are some of the guys that know these much better than I!
But I will keep looking all the same.
Grizzly

[gsracer]

I think you need to reset the hours counter to zero, sorry can't remember how

[AlexG]

If I remember correct Hours counter is in Maintenance menu. Try 1234 password.