HVAC piping design software

[NoNickName]

Anyone any experience with a piping design software?
Would anybody suggest any good software package?

[Peter_1]

Is it for refrigerant copper pipes or water pipes?
Danven from Danfoss,
Coolpack

I used in the past an old package from Danfoss where you could add bends, sighth glasses, upgoing lines, double risers but since windoiws 98, it isn't working any longer....

Further you have the software from Carrier and Trane, Dupont de Nemours has a very nice (read expensive) one,....

[Peter_1]

http://www.whiterosesoftware.com/micropipe.html

[BESC5240]

I used in the past an old package from Danfoss where you could add bends, sighth glasses, upgoing lines, double risers but since windoiws 98, it isn't working any longer....

Hi Peter,
the latest software from Danfoss (DIRCALC_1.14) allows you to calculate refrigerant pipes for more the 20 refrigerants (including CO2), and to add filter driers, solenoids and other valves, ... and it's for free (downloadable from every Danfoss site)...
Bruno

[NoNickName]

Thanks, I'll give it a try. I was searching something to give a service to my customers who install split system with remote condensers.

[NoNickName]

I can't seem to find the access to the download section of Danfoss website (as all corporate websites are a mess).
And the registration form ends in a SERVER ERROR message.

[Renato RR]

No Nick how do you produce chiller when you need soft for that?Or how do you produce chiller when you dont have it yet?

Renato

[Josip]

Hello NoNickName :)


I can't seem to find the access to the download section of Danfoss website (as all corporate websites are a mess).
And the registration form ends in a SERVER ERROR message.

Try this links:

http://www.danfoss.com/Asean/BusinessAreas/Refrigeration+and+Air+Conditioning/Product+Selection+Tools+Details/DIRcalc.htm

http://www.thermokey.it/

http://www.flatplate.com/index.htm

Hope to find something you need ;)

Come back with comments :)

Best regards,

Josip

[NoNickName]

No Nick how do you produce chiller when you need soft for that?Or how do you produce chiller when you dont have it yet?

Renato

I'm searching for a software for a service to customers who don't do that themselves.
Of course we are already calculating the required pipe size on our products, but that has nothing to do with a HVAC DX plant

[Peter_1]

Bruno,
Ik vind enkel 1.13 versie, waar staat de 1.14 versie?
Gevonden http://www.danfoss.com/Holland/BusinessAreas/Refrigeration+and+Air+Conditioning/Product+Selection+Tools+Details/DIRcalc.htm

=Dircalc link on the bottom an exe and a zip file, it is multilanguage but the page is in Dutch

NoNickName, Why not provide them this free software?

[NoNickName]

NoNickName, Why not provide them this free software?

Oh, yeah, I'm tempted. But you know salesmen... why not giving the customer a full service?

[Josip]

Bruno,
Ik vind enkel 1.13 versie, waar staat de 1.14 versie?
Gevonden http://www.danfoss.com/Holland/BusinessAreas/Refrigeration+and+Air+Conditioning/Product+Selection+Tools+Details/DIRcalc.htm

=Dircalc link on the bottom an exe and a zip file, it is multilanguage but the page is in Dutch



NoNickName, Why not provide them this free software?



Oh, yeah, I'm tempted. But you know salesmen... why not giving the customer a full service?
Hello,

I do not understand this :( (maybe no need :confused: ) this is DIRCalc and not a calculator :)

In my opinion problems start here, everyone is a HVACR designer (the best one :eek: ) but later on coming back with basic questions :) asking for help.

NHF, please ;)

Best regards,

Josip

[NoNickName]

I never told anyone I'm the best engineer of the world. And never heard any croatian engineer is the best of the world.
Dircalc is dircalc and not a calculator. Ok, so what?
Let's come back on topic: I need to provide a service to our customers, and I cannot do it on paper, I need to do it in some automatic way, with a technical eye-catching presentation.
Josip, if you would like to help me, thank you very much. If you don't, see you next time.

[Josip]

:eek: Hello NoNickName :)


I never told anyone I'm the best engineer of the world. And never heard any croatian engineer is the best of the world.
Dircalc is dircalc and not a calculator. Ok, so what?
Let's come back on topic: I need to provide a service to our customers, and I cannot do it on paper, I need to do it in some automatic way, with a technical eye-catching presentation.
Josip, if you would like to help me, thank you very much. If you don't, see you next tim

No need to be so angry :( ,

Either, you or me did not catch the point :)


NoNickName, Why not provide them this free software?


About this was my question :confused: , of course, I agree with you to give the customer full support using any available method, software or whatever, always :) even if, sometimes, they do not pay for ;)


I would like to see other comments about, it is possible that I am not right....

Please, tell us why I put so many links to:
http://www.refrigeration-engineer.com/forums/local_links.php?catid=5

if I do not like to help:

Best regards,

Josip:)

[NoNickName]

Ok, Josip, we made our point clear. Sorry for being rude.

[Josip]

Ok, Josip, we made our point clear. Sorry for being rude.

:) No problem NoNickName :)

English is not our natural language and mistakes are possible (sh't happens ;) )

Best regards,

Josip:)

[US Iceman]

sh't happens

I think this is as universal as Hello. :D

[klimek]

What about Hevacomp? Anyone uses it? Is it good?
Some time ago I tried to find it in "peer to peer" programs (just for taining purpose;) ) and couldn't find it.

[BESC5240]

Bruno,
Ik vind enkel 1.13 versie, waar staat de 1.14 versie?
Gevonden http://www.danfoss.com/Holland/BusinessAreas/Refrigeration+and+Air+Conditioning/Product+Selection+Tools+Details/DIRcalc.htm

=Dircalc link on the bottom an exe and a zip file, it is multilanguage but the page is in Dutch

NoNickName, Why not provide them this free software?
Dag Peter,
De versie die overal zou moeten beschikbaar zijn is de 1.14. Als ik jouw link volg, krijg ik ook de 1.14 .

Here is the link with details in italian:
http://www.danfoss.com/Italy/BusinessAreas/Refrigeration+and+Air+Conditioning/Product+Selection+Tools+Details/DIRcalc.htm

[Raghunandan]

Anyone any experience with a piping design software?
Would anybody suggest any good software package?

hi !!! is it copper or Cupronickel tubes ?

Thanks

[Raghunandan]

hello
I am manufacturer of wire wound finned tubes

[Raghunandan]

hello
I am manufacturer of wire wound finned tubes

[NoNickName]

Thanks everybody for your feedback.

[Peter_1]

Raghunandan,
Can you provide us your company website please?
It can't be found on your private profile.

I'm happy what you do in your country with the extra incomes you gain from your company.

[Peter_1]

Morsy2021 provided me a very good, for me new service
google.mail.com
don't type www before it
Have once a look

[Abby Normal]

http://www.taco-hvac.com/en/products.html?current_category=84&PHPSESSID=92c770e59d14f5ea9bcdffb16904c1d6

[janbiglar]

Hi every body
I wanna start to learn HVAC designing, which book is excellent for me? any body have that e-book? Could you please send me to "janbiglar@gmail.com"?
Thanks