Tayters
09-04-2015, 11:02 PM
After a bit of know how please chaps.
Got a some jobs to do on a site with a few of the above VRV's and just doing my homework before the big day.
Ducted unit requires new PCB. Is there anything to do before or after with regards to addressing? Unit is wired to one remote which doesn't control any other units.
Wall mount coming out and staying out for good on another system. Again just on its own remote. How do I go about telling the system about the change - is it just hold the button down (reset one?) outdoors for a few secs to get the outdoor to rescan the network?
To further complicate things (or perhaps not!) there is a central controller of some description. Not sure if these units are on it but of they are is there anything here which needs to be tinkered with?
Not got any indoor model numbers but the outdoor is of the RSEYP8KJY1 3 pipe vintage.
Cheers,
Andy.
Got a some jobs to do on a site with a few of the above VRV's and just doing my homework before the big day.
Ducted unit requires new PCB. Is there anything to do before or after with regards to addressing? Unit is wired to one remote which doesn't control any other units.
Wall mount coming out and staying out for good on another system. Again just on its own remote. How do I go about telling the system about the change - is it just hold the button down (reset one?) outdoors for a few secs to get the outdoor to rescan the network?
To further complicate things (or perhaps not!) there is a central controller of some description. Not sure if these units are on it but of they are is there anything here which needs to be tinkered with?
Not got any indoor model numbers but the outdoor is of the RSEYP8KJY1 3 pipe vintage.
Cheers,
Andy.