PDA

View Full Version : Free software, hm but not all







Josip
24-04-2006, 10:53 PM
Hello,

hope this will make some happy :) :) :) some maybe not ;) becuse there is a lot to read and learn.
Dear gentlemen, links are here help yourself, please:

http://www.bfrl.nist.gov/info/software.html

MOIST
User-friendly, personal computer program that predicts the one-dimensional transfer of heat and moisture. MOIST 3 is designed to run on any IBM-compatible personal computer having a Microsoft Windows operating system

EVAP-COND:)
Simulation models for a finned-tube evaporator and condenser

CYCLE_D:(
Vapor Compression Cycle Design Program

http://www.bfrl.nist.gov/IAQanalysis/software/index.htm

CONTAM
Multizone indoor air quality and ventilation analysis computer program designed to help you predict: Airflows, Contaminant Concentrations, and Personal exposure.

REFLEAK
Leak/Recharge Simulation Program for Refrigerant Mixtures

Your comments, as always, are welcome ;)

Best regards,

Josip

NoNickName
25-04-2006, 09:49 AM
I've been using evap-cond and it is a very useful tool.

hiloo
24-11-2007, 04:10 PM
I've been using evap-cond and it is a very useful tool.

Did you confirm calculation made by this program with real made heat exchanger? I think this software may be usefull but if the calculation are good?
Sorry for my english :)

NoNickName
25-11-2007, 10:14 AM
No, I didn't cross check the results, so I can't confirm the results are reliable, though I don't see any reason why they shouldn't

girina
24-11-2010, 10:14 AM
Someone have a version of Refleak?????
I buy it from NIST (190$) but it doesn't work!!
And I have to do some simulation urgently!!
Someone can help me???