View Full Version : Tonon forty water chiller ,HELP

07-04-2015, 07:51 PM
Tonon forty water chiller
Model galaxy 154
This unit has an error code acf9 which equates to a parameter fault. The other fault is aefl which is a flow error even though the pump isn't being given a run signal
The controller is a dixell ipro chill with xweb 500.
What I really need is pass codes so I can access and interrogate the controller and find out if anyone is familiar with this thing

07-04-2015, 07:57 PM
Default code is 321

07-04-2015, 10:15 PM
Cheers chemi , il give that a go tommorow

08-04-2015, 08:00 AM
Unfortunatly that didn't work. Thanks anyway

08-04-2015, 11:37 AM
Sorry, try contact Dixel UK, they might be useful.

install monkey
09-04-2015, 07:29 PM
1234 is level2 password

25-04-2015, 12:37 AM
Hopefully your issue sorted? If not....Dixell Ichill series can be a problem because custom passwords can be set by users. Try default password 1 level 1, 2 level 2, 3 level 3.
Probably best to view and set parameters through XWEB, rather than on controller keypad.
If your XWEB has remote access through IP address - you can set up the Dixell controller from remote location....I could do it from Australia!