View Full Version : Elm 200 controller (Mini Pack?)

25-02-2015, 07:42 PM
Hi Guys.
I have been doing some digging and have drawn a blank!

I have recently taken over the maintenance of a site, which has some plant with one of the above Elm Controllers fitted.
I believe with these I need a setup controller to access the controls?
Can anyone advise as to whether this is true and what options are available?
Thanks Grizzly.

25-02-2015, 08:59 PM
No idea really Grizzly, I assume that you've seen the manual...

25-02-2015, 09:08 PM
Thanks for your efforts Brian.
I had indeed managed to source the Manual and if you read it refers to an SUU (Set Up Unit!).
Which I think is a sort of plugged in hand held unit?
Hence my asking for advise / help, from those that may know.
I am assuming this is more like the supermarket guys domain than the areas of our Profession that I normally frequent. ( Posh way of saying out of my depth!)

25-02-2015, 09:18 PM

I had one years ago but Christ knows what happened to it. It has a telephone jack plug to go into the front of the controller to adjust the parameters

25-02-2015, 09:22 PM
Yes you need the setup unit, look up elm on equipment spares uk , you will get a look at it .

25-02-2015, 09:35 PM
Thanks for the input Guys!
It is appreciated.
RB. The genesis controller listed, would you know whether or not its backwards compatible.

I think what I am after maybe an earlier controller?
Which you presumably are aware of?

Thanks for your input as well Joe.
Incidentally did you realise that the site you recommended (Brilliant by the way) is the same site that RB listed?
Thanks, Anyone out there still dealing with operating said units?


25-02-2015, 10:14 PM
The plug in modules are backward compatable, but depends on how far back we're talking? the one Richard has listed will do you, the older one was like a large plastic junction box with a keypad.

25-02-2015, 10:15 PM
The controller on the site is for the minipack 200, Believe it or not but these controllers and handsets have been obselete for possibly over 10 years.

25-02-2015, 10:17 PM
Keep dropping in a minute after tonight will have to learn to type faster haha.

26-02-2015, 07:06 AM
The controller on the site is for the minipack 200, Believe it or not but these controllers and handsets have been obselete for possibly over 10 years.
Oh! I believe it Joe!
New to the site and new to us, but in reality I think it's year 2000.From what I can make out on the faded Data plate.

26-02-2015, 11:07 AM
Hello grizzly, these controllers as well as the handsets can be bought from Maxey Moverly as well as rcs controls, these controllers are usually bull it proof, I bought a handset a few weeks ago from climate centre

26-02-2015, 11:17 AM
Thank you for the info.
Very much appreciated and very helpful.

5k probe
03-04-2015, 10:19 AM
Radford controls also support the old ELM equipment.


I also worked for ELM for 9 years so if you have any questions please ask away. I also have a comprehensive list of all the manuals as well.

07-04-2015, 11:18 PM
hi i just got a site with this controller not sure which one yet . is there a possibilty the i could get a copy of some of the manauls