PDA

View Full Version : Just for fun



david.findlay
13-01-2015, 06:13 PM
Any one want to hazard a guess as to what this is?
I placed an 8" shifter in the picture to give a size reference
Not really difficult I know but you don't often see them this size....

Grizzly
13-01-2015, 06:45 PM
Hi David.
An interesting Photo you have there!
It looks like as you say a Large ?
Non Return Valve components maybe?
I have seen check valves of a similar design but never that big!
Grizzly

Brian_UK
13-01-2015, 08:54 PM
Or a really huge solenoid valve?

PaulZ
13-01-2015, 09:35 PM
Hi David
Looks like the seat out of a stop / check valve, I would guess the valve is about 400 mm and the seat material looks like white metal.
Paul

david.findlay
13-01-2015, 10:31 PM
11933
Well done gentlemen it is indeed a suction check valve or as Frick call it a 12" multivalve assembly
It sits within this housing, the seat is actually just an "O" ring set into the sliding button
Had to replace because it was binding on the shaft & allowing the compressor to run backward on shutdown & screws don't like that!

RANGER1
14-01-2015, 08:57 AM
Interesting a Fric in Scotland, you would have thought a Howden for sure!
Globalization I guess.