fixit45
04-01-2015, 04:36 AM
Hi, called a service company recommended by panasonic and was told there is a 2 week wait.....I have somebody else who will come in a day or two but has not worked on panasonics for a few years, does not know my model well. .
I checked for the error code on the remote control; and got 2 bars showing, did not hear any beeps (but then i dont hear high pitch much.)
(24 hrs later)... just read the instructions again , found error code H16..
Does any one know what this means.
How do you clear the error code ?
My unit is 7 years old the first time the unit just stopped operating, no flashing light, power light still on.
I turned power off , cleaned filters (just in case) It seemed to be working OK. A couple of days later it stopped with flashing timer light , so i found out the code, i think..
Today i turned power to both units off while I took the cover off the outside unit for a look.
Did not see anything . Turned power back on, started unit and it seemed to working ok.
Power reset??
Turned power off again, had a look at the circuit board of outdoor unit and found some small 1-2 mm animal/insect bodies. I have previously saved other circuit boards that have failed due to ****roaches by cleaning so i cleaned the side of the board facing up.
How do I remove the whole board? i would like to look at the underside.
Thanks,
Oops , forgot to ask , does anyone know where I could get a service manual for this model i could show my fridgy when he comes.?,
I checked for the error code on the remote control; and got 2 bars showing, did not hear any beeps (but then i dont hear high pitch much.)
(24 hrs later)... just read the instructions again , found error code H16..
Does any one know what this means.
How do you clear the error code ?
My unit is 7 years old the first time the unit just stopped operating, no flashing light, power light still on.
I turned power off , cleaned filters (just in case) It seemed to be working OK. A couple of days later it stopped with flashing timer light , so i found out the code, i think..
Today i turned power to both units off while I took the cover off the outside unit for a look.
Did not see anything . Turned power back on, started unit and it seemed to working ok.
Power reset??
Turned power off again, had a look at the circuit board of outdoor unit and found some small 1-2 mm animal/insect bodies. I have previously saved other circuit boards that have failed due to ****roaches by cleaning so i cleaned the side of the board facing up.
How do I remove the whole board? i would like to look at the underside.
Thanks,
Oops , forgot to ask , does anyone know where I could get a service manual for this model i could show my fridgy when he comes.?,