PDA

View Full Version : Start device


devlin maguire
22-12-2014, 11:26 AM
Can I https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcQpfdAj9pq9Rfi6XUQUBY_1KIL02YYWbFwAybxc2aic7M6HHtuLreplace this With a danfoss PTC http://www.sparesrus.biz/stock-grx/relays/103N0002-100-00.JPG
Devlin
Rob White
22-12-2014, 12:26 PM
.

Not sure?

What is the comp?

Rob

.
devlin maguire
22-12-2014, 01:25 PM
Its on a polar ice machine could be a necchi but its a little R600 pot dont know the mod number sorry
D
Rob White
22-12-2014, 03:48 PM
.

My initial response would be no, but it does depend on
what size it is and the starting resistances.

I found this

http://www.amazon.com/Black-Plastic-Housing-Refrigerator-Starter/dp/B00N3WFW5K/ref=pd_sim_hi_1/181-0593815-5105412?ie=UTF8&refRID=0A4AVMPR3ZKNYPQ4XQE2

Rob

.
Glenn Moore
22-12-2014, 08:05 PM
Hi Devlin
You could use a Danfoss relay but make sure its from an R600A Compressor model as the electrics are sealed. Or you can use a Universal relay type Supco they are designed to fit all makes of small pot compressors, but again make sure its a sealed type. You can get them from Dean & Wood , Climate etc