PDA

View Full Version : High and low voltage protection device







kefah
16-12-2014, 07:39 PM
hi
due to unstable supplied voltage in Iraq
u must install a device for voltage protection
the electric here voltage is 220 /50 hz
specia;lly with AC unit
this device will cut current when voltage is lower than 185 volt
o higher than 260 volt

this device max operating current is 30 amp
here is photo
http://www.mediafire.com/convkey/e160/v0ci8bouormtu8wzg.jpg

http://www.mediafire.com/convkey/993a/xoayu53q5exdaxvzg.jpg

what is your opinion about it

al
17-12-2014, 11:22 AM
Looks a neat unit, i wonder is the 30a rating a motor rating?

MikeHolm
17-12-2014, 12:24 PM
I see it meets the UL, haha.

kefah
17-12-2014, 12:59 PM
Looks a neat unit, i wonder is the 30a rating a motor rating?

yes
it can withstand split ac unit to 36000 BTU
it rated for max load of 30 ampere

mbc
18-12-2014, 04:49 AM
Also you use control phase with contactor for any Ampere you want (one or 3 phase)
Also you can chose your running rang