PDA

View Full Version : Problem board i/o digital Mypro Cp3







Spankyy
05-12-2014, 09:43 AM
Hi, I have a problem with a cp3 MyPro, the case is receiving digital signals plc, to put it into operation, and the LEDs for digital inputs light, but MyPro not trigger any digital output, the parameters are correct, as in the other 2 compressors in the same center, this remote, I even canviado full motherboard, the communication cable card with digital inputs and outputs, card and digital inputs and outputs, and nothing remains the same .


Any ideas?


Thank you

Spankyy
27-12-2014, 03:55 PM
Solucionado. Ok