PDA

View Full Version : Help with York air conditioner.



Mohammed Qasim
18-04-2006, 11:59 AM
I have a problem with a 47000 BTU/hr York split type air conditioner R407 C ,which has a damaged orifice type of metering device but I cant find it in my country ,so I decided to replace it with TEV but I just foud TEV for R22 of the same capacity ,will it work properly with R407 C if I replace it?

NoNickName
18-04-2006, 12:03 PM
It can work, but consider that the sensitive liquid in the bulb has a different expansion coefficient for R22 and for R407c. I think you will be able to let it work nonetheless.

olaitan
16-03-2009, 04:26 PM
hi mohammed qasim wish to know u am from nigeria the last time i did a work on r407 was to change the compresor replacing with r22 if u need to know

santi_obejero
13-07-2009, 01:30 PM
can you give me help about the calculation on york aircondition in window type package, window package and duct type plzz..

malik55
13-07-2009, 06:29 PM
It will work but observe it and adjust super heat acordingly.

santi_obejero
14-07-2009, 05:19 AM
how to compute the btu per room.. because our professor given us a project about installation of york aircon..

malik55
16-07-2009, 07:35 PM
Try to visit heatcraft refrigeration site
you will find heat calculation sample sheets, get familar and put your required data to calculate total btu heat for a room, in fact this is for low temp but you can get an idea that how to calculate it.
malik55