How to reset/clear on error code on PAR-21MAA Remote Control after replace drain pump

[Tim_Lim]

Hi there can anyone here help in advising on how to clear the error code on the wired controller

[Tim_Lim]

This is for the Mitsubishi VRF air-con

[Tim_Lim]

The Fan coil is PLFY50

[Brian_UK]

Has the fault been repaired ?

Reset is via the self check history display.
www.mitsubishielectric.com.au/assets/leg/par-21maa.pdf

[Tim_Lim]

Hi Mr Brian, in the shortest and most straight-forward approach method. Is it by depressing the "On/Off" button twice and press start button. From there it should clear up on the last error code on the display. This was taught by one of my co-worker.
Kind Regards,
Tim

[install monkey]

press check button twice to display the fault code, press clock on/off button twice quickly to clear after when the fault has been rectified