PDA

View Full Version : Procedure For Selection Of Capillry Tube



AMARNATH JHA
15-04-2006, 05:18 PM
wHAT IS THE PROCEDURE TO SELECT THE CAPILLRY TUBE OF ACCURATE SIZE.
THANKS

Dan
15-04-2006, 05:48 PM
Hi, AMARNATH,
http://www.supco.com/images/20%20cap%20tubing.pdf

This was addressed in a different thread. You can search for key words and perhaps you could have found it yourself. Try searching the forum. I think there are other answers already posted to your question that may be more helpful. I just searched "capillary tube."

fridg
16-04-2006, 02:20 AM
Hey have a look at this thread from this very site.


http://www.refrigeration-engineer.com/forums/showthread.php?t=3800

Peter_1
16-04-2006, 10:51 AM
Som pdf's to help you further

AMARNATH JHA
17-04-2006, 04:59 PM
Som pdf's to help you further


Thanks a lot peter_1
If you have some more information please send to me

nico sonico
02-05-2006, 05:34 AM
we have installed water chiller, euiropean designed, we convert it to 60 hertz, we change the pump and the primary transformer, my question is ? what is the effect in refregiration system of the water chilller,,

i hope someone can give an idea on this .

thanks nico

Fastco
26-06-2006, 04:57 AM
My opinion: not much of a change. a) you will change slightly the capacity in TR (change in COP); b) change in energy consumption; c) may need to check loss in kw (because of cos(phi)
If there is anything else please let me know.
Fastco