PDA

View Full Version : Pls provide Stal S83 & S26 swept volume







Jeter Lin
17-09-2014, 09:37 AM
Hi brothers,
Would you kindly provide Stal S83 & S26 swept volume .
Both motor's spec are 3 phase 380V 60HZ, compressors max speed are 4000 rpm .
Thanks a lot!

Best regards

Josip
17-09-2014, 04:10 PM
Hi, Jeter Lin :)


Hi brothers,
Would you kindly provide Stal S83 & S26 swept volume .
Both motor's spec are 3 phase 380V 60HZ, compressors max speed are 4000 rpm .
Thanks a lot!

Best regards

STAL-MIMI MkII - S26

at 50 Hz 700 m3/h max shaft input power 250 kW
at 60 Hz 840 m3/h max shaft input power 300 kW

Hope this will be of some help to you.

I believe if you search RE forums you can find some capacity data regarding STAL S-83

Best regards, Josip :)

Jeter Lin
18-09-2014, 12:57 AM
Hi, Jeter Lin :)



STAL-MIMI MkII - S26

at 50 Hz 700 m3/h max shaft input power 250 kW
at 60 Hz 840 m3/h max shaft input power 300 kW

Hope this will be of some help to you.

I believe if you search RE forums you can find some capacity data regarding STAL S-83

Best regards, Josip :)






Dear Josip

I'm so deeply apprciated your kindness.

Thanks your help again.

Best regards


Jeter