PDA

View Full Version : BRC1D52 Daiken







daoowdmardinly
17-09-2014, 08:31 AM
Hello , it is possible to get a KWH from this remote controller through a BMS system , if not any solution ? Thanks

frank
17-09-2014, 09:00 AM
It's not a function of the BRC1D controller.

Assuming that it is a simple split type of system you are talking about, for kWh monitoring you need to insert a kWh meter onto your power supply to the outdoor unit.
http://www.crompton-instruments.com/datasheets/KWH_meters_06_2009.pdf

daoowdmardinly
17-09-2014, 09:05 AM
Thanks for your reply , no it is VRV system , any advice for this VRV System with multi Flats about one hundered each have this remote ?

frank
17-09-2014, 12:13 PM
You will need the Intelligent Manager accessory for this ...not a cheap option though

http://www.daikinac.com/content/assets/DOC/I-Manager%20III%20brochure-%20PCIMUSE08-09C%20-%20Daikin%20-%20low%20res.pdf