Frusciante
10-04-2006, 07:14 PM
Hello there!
This is my fisrt post :)
Ok straight to the point:
I am looking for a 3ART29VAA2P thermostat for my zanussi because the one it has right now it will never turn the heater on and the fridge is full of frost. I made a small research and I found out that this thermostat has these specifications:
cold out -32,0° C
warm out: -12,5° C
constant: +4,5° C
It is similar to Ranco K 59 - L 2534 according to this page:
http://www.europart-service.de/katalog/dokumente/kuehl-_gefriergeraete_thermostate_spezial_-_thermostate/thermostat_kg_ranco_304771.htm
I found on a local store some thermostats that say Ranco K59 and have these specs:
Cold out -26c, Warm out -11c, Defrost termination +3.5c* (*constant cut in). Capillary length 1200mm
My question is: CAN I USE THEM?
Thank you guys!
This is my fisrt post :)
Ok straight to the point:
I am looking for a 3ART29VAA2P thermostat for my zanussi because the one it has right now it will never turn the heater on and the fridge is full of frost. I made a small research and I found out that this thermostat has these specifications:
cold out -32,0° C
warm out: -12,5° C
constant: +4,5° C
It is similar to Ranco K 59 - L 2534 according to this page:
http://www.europart-service.de/katalog/dokumente/kuehl-_gefriergeraete_thermostate_spezial_-_thermostate/thermostat_kg_ranco_304771.htm
I found on a local store some thermostats that say Ranco K59 and have these specs:
Cold out -26c, Warm out -11c, Defrost termination +3.5c* (*constant cut in). Capillary length 1200mm
My question is: CAN I USE THEM?
Thank you guys!