PDA

View Full Version : Shinco KFR-50GWZ/BM error code 6 need help please



windzer
13-08-2014, 01:06 AM
where can I find a pipe sensor and a air sensor for this thing to fix error code 6 or can I jump or bypass the sensors to see if this board is bad and where can I buy a new board gt world does not answer there calls or messages please help

windzer
01-09-2014, 09:59 PM
ok pulled pipe sensor got a bad reading so I ordered a 15k I guess that's what one I need on the slow boat from china ...ps put the ac in charge mode to see if it would run and it did .found out that those temp sensor are read at 0 c to find out the k reading is thanks wiki ... cross my fingers to see if that fixes my e06

windzer
13-09-2014, 02:27 PM
well Its running blows cold air I got a 15k from reading this R(0)=15Ką2% ;B(0/100)=3450Ką2% R-T hope its the right one