anking
04-08-2014, 06:33 PM
Hi,
I have a problem with my customers makeline-cooler.
Top part of it (where the food containers are) stays pretty cool (40F) but bottom part doesnt get below 60F & there is excessive condensation on all surfaces inside.
Condenser coil was pretty dirty but evaporator coil is clean & cold. Fans are blowing fine.
What can cause this?
I have a problem with my customers makeline-cooler.
Top part of it (where the food containers are) stays pretty cool (40F) but bottom part doesnt get below 60F & there is excessive condensation on all surfaces inside.
Condenser coil was pretty dirty but evaporator coil is clean & cold. Fans are blowing fine.
What can cause this?