second hand Eliwell ID961

[lemle]

Hello,
I bought one. I have no experience with this controller yet.
The firmware - software seems to be different than usually written in manuals.
It has FAN menu, PA1 and PA2 protected area. Inside CNF, I can found H41, H42, PA2, REL, TAB menu points.
the REL == 23

Has anybody experienced such menu points, so this version has a custom code ?
If not, how can I access those menu points written in manual ?
The Machine Status Menu shows PB1 and PB2 probes, but this model has only one temperature input.

Any idea how to reset to factory settings ?
Thanks.

[Rob White]

.

Ask Eliwell?

http://www.eliwell.it/WorkArea/DownloadAsset.aspx?id=18866

Page 14 and 18

http://www.eliwell.it/product.aspx?id=18806&LangType=2057

Rob

.

[lemle]

Hi,
I have the older version, with square front.
The tech support of Eliwell that was my last option.
Great hint!

[Peter_1]

Give in the right pasword for PA2 to access program level 2 to see H41, H42,....If it's a 2nd hand , someone gave a password for PA (try 21, 22, -21 , -22) You can deprogram PB2 in some models (Evap Probe not present) in level 2