VictorBrown
06-05-2014, 11:44 AM
Good evening all, I hope someone can help,
I've just bought a house with a Daikin ducted system. The controller is a BRC1D61 and the fan runs continuously when the power is on (whether it's actually heating or not). I've spent a lot of time reading online and it appears that code 21.2.02 is supposed to cut the fan off unless the unit is actively heating or cooling. I can get into the menu fine, get to code 21 fine, but to the left there are only dashes where the other setting should be, and I cannot get them to change with the timer button as I've read about. It appears to work on other codes (I haven't confirmed the changes).
I did notice on a forum somewhere that someone had a similar issue, managed to get a service tech on the phone and they had the guy change a setting in the 50 menu (he didn't say what setting).
Any ideas how to get it to change? We're getting tired of the air blowing all the time when it's cold... :eek:
Thanks!
Vic
I've just bought a house with a Daikin ducted system. The controller is a BRC1D61 and the fan runs continuously when the power is on (whether it's actually heating or not). I've spent a lot of time reading online and it appears that code 21.2.02 is supposed to cut the fan off unless the unit is actively heating or cooling. I can get into the menu fine, get to code 21 fine, but to the left there are only dashes where the other setting should be, and I cannot get them to change with the timer button as I've read about. It appears to work on other codes (I haven't confirmed the changes).
I did notice on a forum somewhere that someone had a similar issue, managed to get a service tech on the phone and they had the guy change a setting in the 50 menu (he didn't say what setting).
Any ideas how to get it to change? We're getting tired of the air blowing all the time when it's cold... :eek:
Thanks!
Vic