PDA

View Full Version : R404a



coldroom
20-03-2014, 04:15 PM
hello everyone
Im usually install cold room using R404a refrigerant but i haven't document related pressure and temperature R404a. Hope everyone to help!
Thanks,
1136011361

Rob White
20-03-2014, 04:26 PM
..

http://www.refrigerants.com/pics/ptchart.pdf

http://www.watco.com.mx/HTCPressureTemperatureChart.pdf

http://www.koolantkoolers.com/Portals/0/Pdfs/R404A%20PRESSURE%20TEMPERATURE%20CHART.pdf

http://www.gas2010.com/pdfs/r404_pressure_temp.pdf

That should keep you goining for a while.

Regards

Rob

.

coldroom
20-03-2014, 04:35 PM
Thank Rob White
regards,

mikeref
21-03-2014, 09:38 AM
Just curious....On your second picture, are these condensing units mounted far enough away from the wall for adequate air flow? And..your HP/LP switch could be located on the base plate as vibration up high, as you have it currently on the plastic electrical box, may cause premature mechanical failure.
Thanks for posting pictures.

Shawn Carvin
08-09-2014, 04:52 AM
if you have smart phone
you can down load an app
search : KoolApp - ref. slider
this app was produce from Danfoss