smartDevice
24-02-2014, 11:09 AM
Hi Everyone,
I am in need of some advice in regards to connecting Mitsubishi MNET to a Cool Automation Cool Master for external control via a Lighting Control system.
Link for Cool Automation Box - http://coolautomation.com/products/coolmaster/coolmaster-4000m-mitsubishi-electric-vrf/
To cut a long story short - I do not know what is the correct type of cable to use for MNET. Basically I am going to piggyback an AG150A.
Everywhere I have been reading is contridicting on what type of cable to use. If my research is correct this cable should be acceptable but I am unsure.
http://australia.rs-online.com/web/p/multicore-microphone-instrument-cable/7492576/
I was hoping that someone could confirm that the cable I have suggested is appropriate or post a link to an appropriate cable.
I am in need of some advice in regards to connecting Mitsubishi MNET to a Cool Automation Cool Master for external control via a Lighting Control system.
Link for Cool Automation Box - http://coolautomation.com/products/coolmaster/coolmaster-4000m-mitsubishi-electric-vrf/
To cut a long story short - I do not know what is the correct type of cable to use for MNET. Basically I am going to piggyback an AG150A.
Everywhere I have been reading is contridicting on what type of cable to use. If my research is correct this cable should be acceptable but I am unsure.
http://australia.rs-online.com/web/p/multicore-microphone-instrument-cable/7492576/
I was hoping that someone could confirm that the cable I have suggested is appropriate or post a link to an appropriate cable.