Plunge pool heat exchanger

[condenser]

My first post...
I've installed a nickel brazed plate heat exchanger for chilling pool water that's treated with sodium hypochlorite...Although it should withstand the treatment. .. it has developed a leak after only a few weeks of use. .. I'm trying to source a titanium BPHE but finding it very difficult, has anyone any expertise in this field, will a titanium one do the job and what are my options.. Thanks cond.

[install monkey]

http://www.ukpoolstore.co.uk/acatalog/Bowman_Heat_Exchanger.html
found this- make sure u specify bronze ends;)

[condenser]

I should point out I'm using refrigerant on the secondary side, is the above suitable for refrigerants?

[install monkey]

probably not- my bad,
calorex us condenser heat to warm up pool water- hrp do a coil thats suitable for pool water and fridge gas