Daikin VRV4 reset help

[Deano240]

Hey how do you reset a daikin vrv4 I had 10 units on it now I have 6 and it's still seeing 10. Just need to do a reset. Cheers

[install monkey]

Enforce a re-initialization of communication: hold push button BS3 “return” for minimum 5
seconds.
 After initialization, a test run is required from outdoor unit (hold BS2 “Set” till indication “t01”
appears).

[Deano240]

Thank you great stuff

[install monkey]

manual
http://www.mediafire.com/view/9gj96thtz0l94s6/vrv4.pdf

[VRVIII]

Hey how do you reset a daikin vrv4

If you have removed indoor units - Switch the system off/on then hold down SET button longer than 5 seconds.


I had 10 units on it now I have 6 and it's still seeing 10. Just need to do a reset. Cheers
The number if connected indoor units indicated when using monitoring mode setting 10 is only valid on completion of a successful initialisation i.e. If the system in unable to initialise the number of indoor units detected during the last good initialisation will be indicated.