PDA

View Full Version : hosizaki IM65LE BLOWING CONTROL FUSE



davethefridge
29-01-2014, 06:20 PM
MODEL NO IM65LE
SERIAL NO B05248

5amp fuse in control box is blowing this looks like its there to protect the pcb, could any one tell me what usually blows this fuse as i've got to look at this machine tomorrow
thanks David

Brian_UK
29-01-2014, 08:28 PM
Can only find a service for a Q model and only shows a main power fuse, no PCB as such.

frank
29-01-2014, 08:31 PM
I think you are losing it Brian :p

http://en.hoshizaki-europe.com/product/product/id/196/IM65LEQ_Ball_Ice

nike123
29-01-2014, 08:47 PM
Disconnect any motor and solenoid, and if fuse is holding, reconnect one by one until it blows again.

Brian_UK
29-01-2014, 08:54 PM
I think you are losing it Brian :p

http://en.hoshizaki-europe.com/product/product/id/196/IM65LEQ_Ball_IceI think you're right Frank.

That was the manual I looked at but obviously didn't zoom in far enough on my tablet.

Yep, a choice of two fuses as well.

frank
29-01-2014, 09:20 PM
What tablets are you on.....:D

nike123
29-01-2014, 09:43 PM
Blue ones, maybe!:D

Hard to zoom after two tablets!:)

Andy AC
29-01-2014, 10:46 PM
The last one I had that blew the fuse was the compressor - that was on a smaller unit though, an IM25LE.
The water pumps on those hoshizakis tend to die from water ingress - they aint cheap.