PDA

View Full Version : Climaveneta CVM3000 problem



TOTTIHS
27-01-2014, 11:23 PM
Hi,

I've a problem with a CVM3000C that has four systems but each of the four systems has a fault that will not reset.
Three of the faults are for a comp overtemp the other is for a HP
None of these are real alarms and the input for each of these is not putting a fault signal into the board.
Has anyone come across this or has any suggestions

hector6
12-02-2014, 10:59 PM
Hi,

If you have the 240 volt control circuit made but the fault won't clear it's usually a fault on the main PCB ( cvm )

You are best to speak to Climaveneta uk and they will give you a price for a new one.

Good luck.