PDA

View Full Version : Kotza Computer Software







Gkhmtaylor08
21-01-2014, 12:36 PM
Hi all,

I am hoping you can please assist. I am in search of someone / company that is selling the Kotza Software including the 'Key'.
I believe this company is no longer in existence, hence searching this site for assistance.

If unable to assist, would anyone be able to advise if there is an equivalent program 'out there'?

marc5180
21-01-2014, 12:41 PM
Hi,

Kotza has ceased trading I believe because Patrick has had some serious health problems.

I do have the full kotza programme and also just the refrepair software.
Which are u interested in?

Gkhmtaylor08
21-01-2014, 12:52 PM
Hi Marc,

I am interested in the full program. I believe, this has Refrepair, chill repair, electrical repair all simulated within full program. Is this correct?

Thanks

marc5180
21-01-2014, 01:02 PM
Hi Marc,

I am interested in the full program. I believe, this has Refrepair, chill repair, electrical repair all simulated within full program. Is this correct?

Thanks

Yes that is correct, my version is a few years old but I think it has refrebase, chill repair, elecrepair and I think the hydraulicrepair but I'd have to check this.
I'll contact you by email shortly.

Gkhmtaylor08
21-01-2014, 01:39 PM
That will be great! This will have the full training where you can complete fault finding?

marc5180
21-01-2014, 01:46 PM
That will be great! This will have the full training where you can complete fault finding?

Yes that's it. I've just sent you an email to the one in your profile

RusBuka
21-01-2014, 04:40 PM
Can i have your stuff too? )))

marc5180
21-01-2014, 04:51 PM
Unfortunately the software requires a key to be able to use and it can't be copied because it's encrypted.....well as far as I know.
Otherwise I'd gladly send you a copy

fridge_bloke
26-01-2014, 10:41 PM
I don't supose anyone has any kotza books for sale or PDF copies. My dog has eaten mine and it turns out I can't get them anywhere :(

marc5180
28-01-2014, 11:04 PM
The software cannot be used without the HASP key which is encrypted unfortunately.

marc5180
28-01-2014, 11:19 PM
How, I'm not on skype?

Hamza Alg
26-02-2014, 10:53 PM
am looking for the software too

andy422
27-02-2014, 07:37 PM
hi mark, could you please upload the software to a file share website so i can download it please, dont worry about the key required, if the company is not selling it anymore then i will crack it so everyone and anyone can then use it? cheers

Hamza Alg
27-02-2014, 08:26 PM
mark please try and upload the software. the company is no longer operating or selling the software.

andy let me know when you crack and how i can use it.(after mark uploads it)

marc5180
27-02-2014, 10:15 PM
hi mark, could you please upload the software to a file share website so i can download it please, dont worry about the key required, if the company is not selling it anymore then i will crack it so everyone and anyone can then use it? cheers

Let me get this right. You want me to send you the software that I paid 1300 for so you can copy it and distribute it to everyone else........yes ok.

If you want it then buy it

marc5180
27-02-2014, 10:16 PM
mark please try and upload the software. the company is no longer operating or selling the software.

andy let me know when you crack and how i can use it.(after mark uploads it)

Same applies^^^^^

Hamza Alg
27-02-2014, 10:42 PM
Let me get this right. You want me to send you the software that I paid 1300 for so you can copy it and distribute it to everyone else........yes ok.

If you want it then buy it

its not about price. we just said the software is no longer for sale. and the company has shut down. you will learn from the software and you will stop using it so why not help out the would be future refrigeration engineers?

so tell me where to buy the software?

cyclon2010
31-03-2014, 12:58 PM
Unfortunately the software requires a key to be able to use and it can't be copied because it's encrypted.....well as far as I know.
Otherwise I'd gladly send you a copy
Hello marc5180! I am a student. I'm very need Ebook and Software of Kotza-International. Could you send it to me are not ? I would be very grateful. :)
I'm sorry because I speak english very bad ! :(

"Software Kotza" This software can copy copyrighted by simulator hard lock (Crack).
There are 2 tutorials crack.
1. Tutorial 1
http://www.software-key.org/haspsbs.html
2. Tutorial 2
https://www.youtube.com/watch?v=DrvsCcXfdj4&list=FLoEfZ9WKy2Svw6BRddYbGng&index=4
https://app.box.com/s/gmbt8fxoh1bunvda266x.

You can refer to it. I could guide you use that or use software Teamviewer. But we can only be copied copyright of "Software Kotza" when software which that also copyright.

marc5180
31-03-2014, 01:11 PM
I've just sent you a message to your email address that you have listed.

cyclon2010
31-03-2014, 03:27 PM
Thanks for the reply email !
If you use Windows 64 bit, you can still copy it. If you agree, I will guide you. I had success with a few programs.

semghdou
18-05-2014, 07:07 AM
please guys I much need this software, I talked to Patrick Kotza last year he told me he had health problems and he had to stop this forever.
I found an agent in south Africa "www.coolit.co.za/refri/", unfortunately the last copy was bought for another person.
Now I feel there is a hope to get this amazing software.
Please help me.

noda
27-05-2014, 06:51 AM
Hi Marc,
I'm a student in field of Refrigeration. Can you share the demo version of "Kotza software". I heard that it's very useful for student for the first practicing so I would like to refer it.
Thank you so much!

huskyman
09-07-2014, 12:14 PM
Hi marc5180
Do you still have the kotza software with hasp key. What windows does it work on and how much you looking to get for it, i am interested in buying it from you.


Huskyman

marc5180
09-07-2014, 01:05 PM
Check your email

johnjones
29-07-2014, 03:15 AM
Hi, wondering if you can help me,
I have the full Kotza cd No.12B nov 2006 version, last year I email Kotza and they sent me cd no. 17 USB march 2010, unfortunately I took to long to look at the disk they sent and it was blank.
I have the USB Key for the software but I don't have a version that can run on windows 7.

are you able to help ? I presume there is no copy right issues as we hold a Valid key, if not I may have to look at building an old pc as we use this for apprentice training.



Hi,

Kotza has ceased trading I believe because Patrick has had some serious health problems.

I do have the full kotza programme and also just the refrepair software.
Which are u interested in?

fridge_bloke
07-09-2014, 05:06 PM
Hi. Sorry to keep this thead going. I'm after a copy of the program. Iv still got my old serial unlock but need the software for my boy as he wants to follow In my footsteps. Any help with locating will be appreciated, cheers in advance

fridge_bloke
18-09-2014, 10:47 AM
cyclon2010 my email is i (mishjohnson@hotmail.com)n my vCard....thanks

Glenn Moore
24-09-2014, 09:47 PM
Hi All
I would suggest you all go on your local Danfoss Web site and join the Danfoss E Learning programme . This is normally free and consists of over 100 modules that you can learn from , not only is there lessons in Basic up to advanced refrigeration, industrial refrigeration , Invertor Drives and Heating controls . Each module lasts for about 30 minutes and you do them in your own time. You can learn coldroom calculations and design, how expansion valves work etc etc . It is a great free learning tool for the fridge industry , there are at least 2 modules dedicated to Co2 design and operation.
Some of the modules have animation of how valves operate in a system and how systems function, Join now why it is still FOC This is a fantastic learning tool and uses the latest technology Let me know what you think of it.
Br Glenn

dino pushkin
25-09-2014, 06:37 PM
hi mark how much you want for it i am interested in buying