PDA

View Full Version : Ts 300 cycle sentry



transfreeze
16-01-2014, 02:47 PM
Hi all , I have a ts 300 2004 with a cycle sentry fault it seams to only cut out on first pull down set at +4 for veg on re starting it then runs on continuous mode,on eng,or elec, no faults on screen for over 1 year fitted new 105 amp battery yesterday after service + alt brush set. It cut out on elec opp for 2hrs last night then cut in and ran all night. then it stayed on continuous mode on eng with cycles on screen.Any pointers ??????:confused:

cadwaladr
17-01-2014, 12:02 AM
Have you changed or bypassed the on/off switch on the outside of the unit they can cause charging issues?

transfreeze
17-01-2014, 12:58 PM
no not yet just picked up new switch will try it Monday thanks for your help.:rolleyes:

Top_cat
19-01-2014, 11:28 AM
Morning Transfreeze.

You shouldn't be using cycle sentry for chill anyway chap, It's a fuel saver for deep freeze only.

The on/off rocker switch is a notorious fault for charging issues as Cad already pointed out.

transfreeze
04-02-2014, 11:12 AM
hi all fitted new on/off switch its 100% again. stripped the switch contacts like new but wires green from posts 30mm in to loom.thanks for viewing.

cadwaladr
04-02-2014, 07:48 PM
your very welcome,thanks for letting us know.