View Full Version : Ductulator
Pravin
09-03-2006, 03:15 AM
I URGENTLY NEED A SITE WHERE A DUCTULATOR OR JUST ANY SOFTWARE TO CALCULATE DUCTINGH SYSTEM-
Regards
afeef
09-03-2006, 05:59 AM
hi dear
try these sites
www.ductmate.com
http://coolit.co.za
www.psychrometric.com
www.warmair.com
www.energy.ca.gov
www.toolbase.org
www.airah.org.au
www.smacna.org
www.connel.net
good luck
faithfully
afeef
MANIS
15-06-2006, 09:22 AM
HI pravin check this Small Softwere,,
Regards
Tester
19-10-2007, 10:40 PM
HI pravin check this Small Softwere,,
Regards
Thanks a caboodle for this zip file. :) It seems very useful. Too bad you have to go through the added hassle of downloading the old visual basic run times though. :( But hey, anything for a free tool. :D
BigJon3475
20-10-2007, 03:38 AM
http://efficientcomfort.net/Calculators.html
HvacKevin
31-01-2009, 10:30 PM
I Have a 5 ton trane heat pump with a 42 foot run of duct. The duct starts as a 24x10 for 6 feet, then reduces to 20x8 for 12 feet then 16x8 for 18 feet and then 12x8 for 6 feet. The rooms in the house are all fed from this main duct line and are 5" round ducts. Any thoughts?
Brian_UK
31-01-2009, 10:53 PM
First thought, perhaps you should start your own thread. :)
frank
01-02-2009, 05:07 PM
I Have a 5 ton trane heat pump with a 42 foot run of duct. The duct starts as a 24x10 for 6 feet, then reduces to 20x8 for 12 feet then 16x8 for 18 feet and then 12x8 for 6 feet. The rooms in the house are all fed from this main duct line and are 5" round ducts. Any thoughts?
What exactly is the problem you wish us to advise on?
HvacKevin
04-03-2010, 10:35 PM
HI pravin check this Small Softwere,,
Regards
Hi the file wouldnt run for me. Its not a virus is it?
MANIS
05-03-2010, 04:46 PM
send me your email, i will post it there
ginx1985
17-03-2010, 02:49 AM
send me your email, i will post it there
it did not run on my pc please teach me how. this my e-mail add: ginx1985@yahoo.com
thanks
sbanuelos
11-05-2010, 07:17 PM
it did not run on my pc please teach me how. this my e-mail add: ginx1985@yahoo.com
thanks
Just download the zip file that MANIS posted, unzip, and run the program, if you cannot run the program because of vbrun300.dll error, it is because you don't have that file in your windows installation. In order to fix it, you must download vbrun300.dll file from the site dll-files.com and unzip the file on the c:\WINDOWS\System and now you can run the program!! :)
@MANIS Thanks for the program! :)
NOVATO1
09-12-2010, 05:36 AM
Hi Manis
file wouldnt run on mi PC, could you send it at alvarosyp@yahoo.com
Thank you
badass78camaro
25-04-2011, 04:51 AM
Thanks for the freebie
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.