PDA

View Full Version : Heat load calculation







sgke
08-12-2013, 10:05 PM
Hello :):):)

Any one can help me to calculate the heat load of Compressed Air Dryer.

Air Flow Rate is 100 CFM,
Inlet Air Temperature is 45 dig C,
Ambient Air Temperature is 40 dig C
Air Pressure is 7 bar,
Required Dew Point Temperature is 3 dig C.

If u can pls teach me how to calculate it.
Awaiting for your replay.

Magoo
09-12-2013, 03:19 AM
Talk to an air compressor supplier, they supply driers as well.
+3.0' C dew point is a big ask, may require several driers, and a pre-dehumidifier.
Use a psychrometric chart, you will need the ambient wet bulb condition.
No free engineering this week for first posters.

magoo

Josip
09-12-2013, 10:01 PM
Talk to an air compressor supplier, they supply driers as well.
+3.0' C dew point is a big ask, may require several driers, and a pre-dehumidifier.
Use a psychrometric chart, you will need the ambient wet bulb condition.
No free engineering this week for first posters.

magoo

Nice Magoo .... Like professor ....

Best regards, Josip :)