Dixell controller help

[padraic]

I am working on a Linde multinor 1540/80 dual temp cabinet with a dixell controller and the cabinet keeps icing up once a month and I can't check defrost settings.
i changed the defrost probe and heaters are working but will only stay on defrost for 5min.
hopefully someone might info on these

[install monkey]

http://www.emersonclimate.com/europe/ProductDocuments/DixellLiterature/XR420C_GB.pdf
http://www.emersonclimate.com/europe/ProductDocuments/DixellLiterature/XR460C_GB.pdf
i am someone! :p

[padraic]

Thanks install monkey but my controller looks different and tried all the regular controllers parameters but just can't get in to parameters. Mine is a display linked to a small pcb board

[install monkey]

Try emerson.climate europes website then as they do dixell- :D

[al]

what model is it padraic? usually hold up (or down arrow, can never remember which) and set, displays first parameter, release and press and hold again, after a few seconds gives you all parameters.

[install monkey]

http://www.emersonclimate.com/europe/ProductDocuments/DixellLiterature/XM660K_XM669K_GB.pdf
is it this 1??

[padraic]

That looks like it allright but it just won't let me in no matter what I try.. CON will display and nothing else...?

[macca33]

Put an elliwell on it.

[install monkey]

level 2 password 321

[1mikeefc1]

Should be set and down for 5/6 seconds then show pas enter 3 2 1 as pass code and your parameters will be accessible.