PDA

View Full Version : CPS VG 200 Vacuum Gauge







noahsark
24-11-2013, 04:59 PM
Hi all I need to clean the sensor on my vacuum gauge does any one know if you need to screw of brass nut from body to do this. I do not want to crack trying.Gauge is just scrolling rrrrr not sure why?

monkey spanners
24-11-2013, 09:33 PM
Different make, no need to disassemble the cps though, just remove the sealing rubber, the rinsing out would be similar,

http://www.youtube.com/watch?v=0RSRMqIuvC4