fujitsu inverter problem

[Greek_engineer]

hello my friends!
I face some problems with a fujitsu inverter a/c.

model: asya 12 lcc

indoor (on the mask) indicator leds:

red green
flashing flashing (together)
flashing flashing (together)
flashing
flashing
flashing
flashing
.........................................

even in fan mode the a/c is not functioning.
can you help with some information and service manual?
thanks in advance!

[install monkey]

http://www.mediafire.com/view/3ds6pd94tehnnp9/ASYA12LC.pdf
check the speed of the flashes - service manual above

[bigor_2]

indoor fan motor is blocked. with a high probability will need to replace the motor.

[Greek_engineer]

Firstly thanks for the manual,
Secondly the error described in the manual is "locked indoor fan".
What is the reason for this error?
The fan or the circuit border?

[Greek_engineer]

Sorry, the error is "abnormal lock" of the indoor fan.

[bigor_2]

10944
check +15vdc on connector CN2 (fan motor).

[Greek_engineer]

Thanks.I amgoing to check it and then I will inform the rest of the team.

[bigor_2]

This motors is not survive after hot disconnect/connect. Remember it!

[Greek_engineer]

What are you meaning "hot".

[bigor_2]

HOT if power supply is ON.

[Greek_engineer]

The cn2 has 5 coloured cables.
Which of them should I take the dcvolt?

[bigor_2]

10945
Black and white.

[Greek_engineer]

Thanks my friend for the quick answer.

[Greek_engineer]

The dc fan motor accept the 15 dc volt but it should emit a voltage~signal towardsthe circuit so ad to the latter realise that the fan is working well.Am i right?

[bigor_2]

If 15vdc (between black and white wire) and check 300vdc (between black and red wire) is present that motor is broken.

[Greek_engineer]

Where can i find the schematic diagram of the fan motor?

[bigor_2]

Do you want it to disassemble and fix it?

[Greek_engineer]

I want to measure the windings of the fan

[bigor_2]

It is dc motor. Can not ping the coil because between connector and windings there is IC driver.

[Greek_engineer]

Can you give me a photo or example of what you are reffering to ?

[bigor_2]

http://mechatronic-design.com/articles/Keeping%20cool_Figure_01.jpg