Mick Carroll
08-11-2013, 09:52 PM
Hi Guys,
I have a sl400 that operates on diesel for a while until the electric symbol appears on the display it then shuts down and generates codes 36,84,89. {cable not connected}.
I checked the operation of the d/e switch ok.
I checked the phase module and disconnected it.
Unit operates on electric with no faults
Any ideas ?
I have a sl400 that operates on diesel for a while until the electric symbol appears on the display it then shuts down and generates codes 36,84,89. {cable not connected}.
I checked the operation of the d/e switch ok.
I checked the phase module and disconnected it.
Unit operates on electric with no faults
Any ideas ?