Interface betweeb DAIKIN VRV and Home Automation?

[ramikazoun]

Hi everybody,

I m trying to integrate the Daikin VRV system to the home automation, I m using bticino with SCS protocol. Is there any interface between D3net and SCS? or D3net and KNX? I found Zennio that can convert between D3nt and KNX, but should be installed one interface for each A/C unit. I m looking for only one interface that can be installed between the SCS bus and D3net bus.

Thanks a lot

[mchild]

Will this do what you want done?

http://coolautomation.com/products/coolmaster/coolmaster-1000d-daikin-vrv/

[ramikazoun]

mchild. thank you very much for your reply.
Yeah this may work, and I think I have to try it. I just found a tutorial that explain how to use coolmaster1000D betweeb bticino and Daikin:

http://www.myopen-legrandgroup.com/cfs-filesystemfile.ashx/__key/communityserver-components-postattachments/00-00-04-58-14/BT_2D00_CoolMaster.pdf

this internface will convert Daikin protocol to Ethernet so will be able to communicate with the bticino switch. This may be a solution, but first I want to try searching for a direct interface between D3net and SCS protocol, if you know such interface or if it even exists.

[mchild]

Did you look at the other products on the Coolautomation.com site? They have a number of products.