PDA

View Full Version : changing unit of measurer


mp snyder
07-10-2013, 09:45 AM
i have a TK SL200e with tg-vi controller. how do i change it from reading f to c?

Thanks Mike
sonkax
07-10-2013, 06:26 PM
Search forum for guarded/ super guarded acces.
clivemtk
07-10-2013, 07:30 PM
take 1 step back how can people reply without an address
sonkax
08-10-2013, 04:10 AM
http://www.refrigeration-engineer.com/forums/showthread.php?35008-TK-SB-III-SR-uP-IV-controller-how-to-access-super-guarded-access&highlight=guarded+acces. When you see Deg F change to C, enter and you're done!
gravy258
08-10-2013, 08:44 AM
wrong link there Sonkax thats for a SL400.

go to the last screen DDUR 45, press and hold TK button, next screen go to DDUR 45, press hold TK button,
find F arrow key to C then press =
sonkax
09-10-2013, 07:04 PM
sorry i was pointing at the last post:

"Unit on, not running, all alarms cleared (if possible) continuous run selected.
Press TK & Clear and hold until the unit enters Guarded Access (hour meters).
Press mode (circle) repeatedly until you reach Ddur.
Press TK & Clear and hold until the unit enters Super Guarded Access (CRA)
Press mode to scroll further through the menu."