janramon
19-08-2013, 09:53 AM
Daikin inverter 4mxs80E with 2 x 2,5KW innside units (4mxs80E2V3B, FTXS25G2V1B, FTXS25CVMB8)
Problem : always high amp draw (approx.18 amps), compressor the same frequency in forced mode as when 1 or 2 units on.
I cannot find out if it is the compressor or the PCB!
I already know that it's not under or overcharge.
What should be the current draw when in forced cooling mode ?
In heating mode the compressor works perfect, its frequency lowers (very silent, also the fan lowers in frequency)
Thanks for helping!
JRS
Problem : always high amp draw (approx.18 amps), compressor the same frequency in forced mode as when 1 or 2 units on.
I cannot find out if it is the compressor or the PCB!
I already know that it's not under or overcharge.
What should be the current draw when in forced cooling mode ?
In heating mode the compressor works perfect, its frequency lowers (very silent, also the fan lowers in frequency)
Thanks for helping!
JRS