Start delay

[Soma]

Hi guys.I have problem with a Clint liquid chiller(CRA/K 906-p) that uses Danfoss controller.After I switch on the unit, the controller starts the 6 hours delay.I cannot start the unit only after the 6 hours.Does anybody know how I can adjust this time shorter? It is a big problem because if there is a blackout in the summer there will not be cooling for 6 hours. Thanks for any ideas

[chemi-cool]

Model of controller?

[Soma]

MCX controller.It is all that I know about it.

[chemi-cool]

http://www.danfoss.com/North_America/BusinessAreas/Refrigeration+and+Air+Conditioning/Literature/RA_Documentation.htm?CatalogKey=RA-6aa56192-f7e6-4793-b7f9-4c2fa908cc23-en-US:RA-6aa56192-f7e6-4793-b7f9-4c2fa908cc23-en-US&DocumentType=All&Language=en-US&FreeText=MCX&IncludeCurrent=True&IncludeArchived=False

Find your controller and change the required paraeter.

[goshen]

Hi
as chemi stated this parameter ia accsesible via the local keypad!!
good luck