PDA

View Full Version : Selling my stuff







glenn1340
31-07-2013, 01:37 PM
Hi guys. Can any moderator tell me if I`m allowed to advertise my tools on here. I`m getting out of the game now and have no need for the specialised equipment. I would prefer not to use Ebay as I want to sell it as a job lot and not have jokers phoning to buy one item etc. Also I`d like the stuff to go to one of the guys on this site who could make good use of it. Thanks very much, Glenn

chemi-cool
31-07-2013, 05:10 PM
As far as I'm concerned, go ahead and post the list, your email and your terms.

Good luck.

al
31-07-2013, 08:03 PM
Glenn

drop me an email with what you have.

Alec

stufus
31-07-2013, 09:01 PM
Glenn

drop me an email with what you have.

Alec
Something you want to share Al , like when you won the lottery..

Cheers

Stu

RusBuka
31-07-2013, 09:19 PM
+1 want to see what you have)

frank
31-07-2013, 09:49 PM
Use the PM system guys to keep it within the forum rules.......

al
01-08-2013, 05:42 PM
Apparantly HSG have a cheque in the post Stu....

alec

glenn1340
01-08-2013, 08:34 PM
I`m just finished climbing about in my workshop so as soon as I`ve made the list out I`ll post it. Thanks, Glenn

glenn1340
02-08-2013, 10:23 AM
Hi guys, here`s the stuff: Electronic scales
P+M eccentric flaring tool
Imperial flaring and swaging tool set
P+M torque spanner set 17-29 mm
CPS CR700JUK recovery unit 110v
Robinair 240v vac pump 240v 142 litre/min (Hardly used)
" " " " " 21 "(old but ideal for small jobs)
Javac Tek Mate leak detector "
110v transformer
P&M 3/4 pipe bender (hardly used)
" 5/8 " " " "
" 1/2 " " " "
Various bending springs
Refco pipe crimper
Kew armoured cable stripping tool
Electronic refrigerant comparitor
Infra red thermometer
Low pressure nirotogen regulator 0-15 bar
Med " " " 0-70 "
High " " " 0-230 "
Set 4 way manifold gauges marked R22, 402 & 12
" " " " " " R134a in case
" " " " " 410 Refco Nearly new in case
All the gauges with mostly new hoses and QRCs
Gas Arc Portapack lightweight welding set inc. regulators hoses and various nozzles, pepperpot and "hook" nozzle c/w trolley. All Virtually new
less cylinders. Silver solder rods and flux
Flow regulator for use with nitrogen when soldering
Evolution rage chop saw 355 dia blade
Boxes of various copper and brass fittings
Various cable ie shielded, SY and armoured
Dixell xr220 contoller
Various Filter driers
Nunmerous pipe clips, drain hose and armaflex tape
Peristaltic pump boxed
Various cleaning chemicals for coils and flushing etc
240v electric hoist SWL 125kg. Clips around unistrut so you can lift most outdoor units into place.
Price for all the above items 1250
Also for sale a Boss ally 4.5m tower with 3 platforms, castors toe boards and outriggers. It`s 1.5mx900mm so it`s easy to move into tight spots 450
I`m in South Benfleet in Essex S7. PM me and I`ll give my number. Thanks very much.

RusBuka
02-08-2013, 12:58 PM
Damn spc700 110v(

chemi-cool
02-08-2013, 04:01 PM
If it wasn't the cost of shipping , I would have bought it.

Best of luck.